Kode Dot — Programmable pocket device for makers

Programmable pocket device for makers, pentesters and geeksESP32-P4 + C5, an AMOLED touchscreen, wireless, sensors and real I/O in something that fits in your hand. You write the code, and it becomes whatever you need.Most projects die in the setup: a screen, buttons, power and sensors to wire up before you can even begin. Kode Dot hands you a finished platform, so you start with your idea instead of rebuilding the basics.Dual MCU (ESP32 P4 + C5), a crisp AMOLED touchscreen and an SD card slot for your apps. Charge it, flash it and play. Nothing to assemble.Sixteen programmable pins. Plug in cables and wire up sensors, motors or your own boards. The Kode Dot grows with your projects.Browse what the community ships: games, tools and toys. Run them on your Kode Dot.Build with the tools you already knowWi-Fi, Bluetooth LE, infrared and NFC, plus a speaker, a mic and a programmable LED. Out of the box, the Kode Dot talks to your network, your gadgets and the world around it.Every chip, sensor and port the Kode Dot packs in.ESP32-P4 + C5The P4 runs everything; the C5 does the wireless.2.13″ AMOLED displayA crisp 502×410 touch panel.32 MB PSRAM · 32 MB flashReal memory headroom for real apps.NFC · RFID · IRRead and emulate tags, cards and remotes.CO5300 display driverDrives the AMOLED over MIPI-DSI, smooth and fast.CST820 touchQuick, accurate capacitive touch.9-axis IMU6-axis LSM6DSV plus a LIS2MDL compass: a full 9-axis motion stack.ST25R3916B NFCRead, write and emulate 13.56 MHz tags.125 kHz RFIDRead and emulate cards through a discrete analog front-end.IR transceiverBlast and capture infrared. Learn any remote.microSD (SD/MMC)Removable storage for data and big apps.